Myth

Click to Enlarge	Bob Meucci proudly displays his latest creation... The Hi-Tech, extremely accurate "Myth Destroyer" This testing robot is enabling Meucci to custom build shafts that produce less effective cue-ball deflection than any other cue or shaft brand manufactured on or before July 28,1998. See our "Black Dot Shaft" Shaft information.
Click to Enlarge	The Myth Destroyer in its entirety mounted to a 50 x 100 Meucci pool table showing the radar gun, laser-beam alignment and strikeboard; all parts of the Myth Destroyer equipment.
Click to Enlarge	Accuracy is key to us! When establishing the point at which the cue stick strikes the cue ball, a height gauge is deployed to guarantee exact center within just a few thousandth's of an inch.
Click to Enlarge	If you look closely, you'll note the laser beam splits the shaft in half to indicate the point-of-contact the tip will make is lined up precisely 3/16 of an inch to the right of center on the cue ball, the object ball, and the strike board in the background to indicate precisely where the cue ball should hit if there were no deflection at all.
Click to Enlarge	In this picture, the ball has bee struck an has just left the perfectly round detent in a ten thousandth of an inch hardened steel plate that guarantees perfectly repeatable alignment every time. Even a child can operate the Myth Destroyer as perfectly as a physicist and get the exact same results!
Click to Enlarge	Side View: Not only is the Myth Destroyer mounted securely to the table with a 30" bar under the rail and a 12 x12 aluminum base, it is also supported by two steel legs with four inch diameter feet. All to guarantee that there will be NO MOVEMENT from one shot to the next, hour after hour, day after day!
Click to Enlarge	Spine Gauge: This tool has been designed to test for stiffness and radial consistency from one shaft to the next. We have found that, when testing all shaft brands, they vary in stiffness from 3 1/2 to 7 lbs. of pull when pulled 1 inch off-center using a 14 inch pivot point and have radial consistency from as little as 2 ounces to as much as 18. This has allowed us to establish the perfect flexibility level with a maximum of radial consistency. No shaft has perfect radial consistency, though we know you have read false claims to the contrary.